# Cylindrical Coordinates

Read here about a mathmematical coordinate system that is useful in describing tensegrity structures.

# OverviewEdit

A **cylindrical coordinate system** is a three-dimensional coordinate system that specifies point positions by the distance from a chosen reference axis, the direction from the axis relative to a chosen reference direction, and the distance from a chosen reference plane perpendicular to the axis. The latter distance is given as a positive or negative number depending on which side of the reference plane faces the point.

The *origin* of the system is the point where all three coordinates can be given as zero. This is the intersection between the reference plane and the axis. The axis is variously called the *cylindrical* or *longitudinal* axis, to differentiate it from the *polar axis*, which is the ray that lies in the reference plane, starting at the origin and pointing in the reference direction. The distance from the axis may be called the *radial distance* or *radius*, while the angular coordinate is sometimes referred to as the *angular position* or as the *azimuth*. The radius and the azimuth are together called the *polar coordinates*, as they correspond to a two-dimensional polar coordinate system in the plane through the point, parallel to the reference plane. The third coordinate may be called the *height* or *altitude* (if the reference plane is considered horizontal), *longitudinal position*, or *axial position*.

# Use of Cylindrical Coordinates in Tensegrity MathematicsEdit

Cylindrical coordinates are useful in connection with tensegrity structures because many of them feature rotational symmetry about a longitudinal axis. See also, Twist Angle theorem.